Open cooling tower pumps are traditionally operated as constant speed. When balanced, the extra pump head or over-heading is throttled across the discharge balance valve …
Balancing & Trimming Hydronic Constant Speed Pumps
The HVAC hydronic system is proportionally balanced per ASHRAE 90.1 energy standards. The proportional balance, when properly completed, will result in all the extra pump …
Centrifugal Pump Gauge Readout: Adjustments to Balancing for Glycol Temperature
Glycol correction factors were the subject of many of the last few R. L. Deppmann Monday Morning Minutes. While writing these articles, I thought about …
Centrifugal Pump Gauge Readout Corrections for Hydronic Glycol Systems
Ask any test/balance or service technician in the hydronic HVAC world to convert PSIG to feet of head and the multiplier of 2.31 is the …
Centrifugal Pump Gauge Readout Corrections-Velocity Head Corrections
We recently had an inquiry from an engineer who was concerned about pump operation compared with the submitted pump curve. It appeared from the balance …
HVAC Hydronic Pumps: Impeller Trimming with a Drive (VFD)
In the last R. L. Deppmann Monday Morning Minute we covered the use of a B&G Triple Duty Valve to set the maximum speed in …
- Page 2 of 2
- 1
- 2